GTA & All of Ontario
(888) 268-5409
Condo & Rental Mould

Mould in an Ontario Condo or Apartment: A Manager Handoff Checklist

A practical Ontario checklist for documenting a possible mould or moisture concern and giving the landlord, unit owner or condo manager a clear written handoff.

Wright Restorations Canada November 2026 7 min read

🚨 Dealing with active water, fire, sewage, or visible mould? Prioritize safety and arrange appropriate help.

(888) 268-5409

If you see possible mould in an Ontario apartment or condo, start by recording what you can observe, report the moisture concern in writing, and give the right party a clear handoff. For a tenant, that usually means the landlord first; in a condo, building management may also need the details when common elements or building systems could be involved. A resident can observe staining, odour or dampness, but identifying the cause, extent and appropriate work is a professional assessment question.

Start with a Calm, Useful Record

Mould needs moisture to grow, so the most helpful report is not a label such as “black mould.” It is a precise description of what you noticed and what may have happened before it appeared. The City of Toronto advises residents (opens in a new tab) to look for musty odours, condensation and discolouration, and notes that the underlying water or humidity problem must be corrected or mould can keep growing or return.

If safe, make a brief record without touching or disturbing suspected mould. Do not delay urgent reporting, leak response or prompt drying of water-damaged materials to take photos; use the building’s urgent-contact process when needed.

  • Take dated, well-lit photos from a safe position, using camera zoom for detail rather than approaching suspected mould. Include nearby fixtures, ceilings, windows or baseboards where relevant.
  • Note the room, exact location, approximate visible area, first date noticed, any odour, and any visible signs of wetness or dampness. Do not touch the affected area to check.
  • Record observable events: a plumbing leak, overflow, water from above, window condensation, a spill or a recent repair. Do not state a cause as fact if you do not know it.
  • Keep copies of emails, portal submissions, replies and any work-order number. A brief timeline is easier to act on than a long narrative.
  • If belongings appear affected, photograph them in place and make an item list if safe, without handling them or delaying urgent response or drying.

Documenting visible signs does not establish whether the moisture source has been resolved. Avoid opening walls or removing finishes without direction. If you have health symptoms or concerns, speak with a doctor or another appropriate health-care professional.

Use This Manager Handoff Checklist

Send one written report through the building’s stated maintenance channel and, where applicable, email the landlord or unit owner. A concise handoff can reduce back-and-forth while preserving a record.

Copy, complete and send:

  • Subject: Possible mould/moisture concern — [unit number], [room]
  • When noticed: [date and approximate time]
  • What I observed: [location, discolouration/odour/dampness, approximate visible area]
  • What happened beforehand, if known: [for example, water leak, overflow, condensation or unknown]
  • Current condition: [active leak/no active leak observed; visible wetness/no visible wetness/unknown; access limits]
  • Photos and record: [attached photos; timeline/work-order number]
  • Requested next step: Please confirm receipt, advise who will look at the moisture source or affected area, and let me know the access arrangements and next update.
  • Contact and access details: [name, phone, email, availability, pet or entry information]

Keep the language factual. “There is a musty odour and staining beside the bathroom vanity” is more useful than “the whole building has toxic mould.” An inspection can then look at the conditions and possible cause.

If water is actively entering the unit or an immediate safety issue seems present, use the building’s urgent-contact process rather than a routine portal request, and call 911 in an emergency.

Identify the Right Party Without Guessing Responsibility

The Condominium Authority of Ontario explains (opens in a new tab) that condo maintenance and repair-after-damage responsibilities are distinct and depend on the Condominium Act and the corporation’s governing documents. Generally, the corporation maintains common elements and owners maintain their units, including normal wear-and-tear repairs. For repairs after damage, corporations generally repair common elements and standard-unit elements, while owners repair decorative or non-standard elements. Governing documents can alter these responsibilities, so review them before drawing conclusions.

That means a ceiling mark, pipe leak or window issue may involve more than one party. Do not assume responsibility from the location alone. Instead, ask management whether the concern may involve a common element, a standard unit component or another building system, and ask the unit owner or landlord to remain copied.

  • Condo owner-occupant: send the handoff to property management and review the declaration, by-laws and standard unit definition before drawing conclusions about responsibility.
  • Tenant in a condominium: report in writing to your landlord or unit owner first. Also follow the building’s reporting process if access, a shared system or a common area may be involved.
  • Apartment tenant: use the landlord’s or property manager’s written maintenance channel and keep the confirmation. If the concern is in a hallway, laundry room or another shared area, say so clearly in the report.

Ontario Tenant Information: Document, Report, Then Use Official Channels

Ontario’s Residential Tenancies Act, 2006 (opens in a new tab) applies to rental units in residential complexes, subject to the exemptions it sets out. Section 20 makes a landlord responsible for maintaining the residential complex, including its rental units, in a good state of repair and fit for habitation, and for complying with health, safety, housing and maintenance standards. This is general information, not legal advice.

The Landlord and Tenant Board’s maintenance brochure (opens in a new tab) says a tenant should first ask the landlord to fix the problem in writing and keep a copy. If the landlord does not fix the problem within a reasonable time after being informed, it describes contacting the municipality about property standards enforcement, filing a Tenant Application about Maintenance (Form T6), or both. The brochure also advises tenants not to withhold rent over a maintenance problem.

A practical sequence is:

  1. Send the written handoff and save the confirmation.
  2. Give the landlord or manager the information needed to arrange access and look at the concern.
  3. Keep a dated log of communications, observations and work performed.
  4. If the issue remains unresolved, review the LTB’s information and your municipality’s property standards process to understand the available options.

This sequence is not a substitute for legal advice or a finding about who is responsible. It does create a clear record of what was reported and when.

When a Professional Assessment Makes Sense

Visible growth is only one part of the picture. An assessment may be useful for an extensive or recurring concern, an unclear source, persistently damp materials, or possible concealed or shared-building involvement. Toronto’s mould guidance recommends a professional trained in mould remediation for larger areas, listing 4 square metres or more, and stresses correcting the moisture cause.

Owners or property representatives can start with the water-event details, locations, photos and the resident’s handoff. Residents should not try to diagnose hidden conditions or decide the scope of work from appearance alone. If the concern followed a leak or overflow, the water-damage service page explains that category of work.

Request a Property Assessment

Owners, condo corporation representatives and property managers who need help understanding a reported mould or moisture concern can request a property assessment from Wright Restorations. Bring the handoff, photos and any information about leaks or prior repairs. An assessment discussion does not decide legal responsibility between a tenant, landlord, owner or condo corporation.

Frequently Asked Questions

Can a condo manager decide who must repair mould?

Management can help coordinate reporting, access and building information. Repair responsibility depends on the Condominium Act, the corporation's governing documents and the facts of the issue, so it is sensible to ask rather than assume.

I rent a condo. Should I contact the property manager or my landlord?

Notify your landlord or unit owner in writing and keep a copy. Also follow the building's reporting process where a shared system, common area or building access may be involved.

Is visible mould enough to identify the cause?

No. A resident can document what is visible, but the source of moisture and the extent of an issue may require further assessment by a qualified professional.

What should I keep after reporting the issue?

Keep photos, your written report, confirmations, work-order numbers, replies, dates of visits and a simple timeline. These records support clear communication with the responsible parties or official channels.

Related Reading

Sources

  1. Government of Ontario: Residential Tenancies Act, 2006 (opens in a new tab)
  2. Landlord and Tenant Board: Maintenance and Repairs (opens in a new tab)
  3. Condominium Authority of Ontario: Repairs After Damage (opens in a new tab)
  4. City of Toronto: Mould (opens in a new tab)

Managing a reported mould or moisture concern at an Ontario property?

Share the property details and ask about the appropriate next step.

Request a Property Assessment

Share the property location and what you have noticed. A team member can review your request and discuss the appropriate next step.

Optional — we'll send your quote confirmation here.Select the service you need to route your request.Enter the city or municipality where the property is located.Optional — briefly describe the damage or issue to help us prepare.

Enter your 10-digit Canadian phone number including area code.

Your information is secure. No spam, ever.